The front wall is suitable for all common awnings on motorhomes, campers or caravans. The awning wall has 3 sewn-on piping with diameters of 7.0 mm, 6.2 mm and 4.3 mm. The installation is carried out by pulling the piping into the front panel of the awning, on which there is usually a mounted piping strip with a corresponding diameter. After the wall has been pulled in, the 4 robust guying straps with tent pegs have to be anchored in the ground. The assembly is therefore quick and easy in a few minutes and can be done on any awning, regardless of the height at which it was mounted on the vehicle.
This model offers the Sun + Rain Blocker in 6 sizes, each of which differs in the width of the protective wall. The available widths are 240 cm, 280 cm, 330 cm, 370 cm, 430 cm and 480 cm. The height of 200 cm is the same for all Sun + Rain Blocker models. This means that we offer the right front wall for almost all awning widths. If the width of your awning is between our offered dimensions, we recommend choosing the next smallest size. As mentioned, the assembly is child's play and can be done within a few minutes, so that the front wall is also ideal for stays with only a short standing time.
The permanently attached mesh fabric serves to provide shade and at the same time offers a certain amount of wind protection. The fabric causes around 60 percent shading. This material is completely air-permeable and transparent. So you can see through and see what's happening around you. In addition, there is a waterproof and opaque cover that is rolled up downwards and fastened. The rain cover is closed with the help of zippers and covers the entire front wall surface. This cover is made of a polyester with 3000 mm water column and a UV 50+ sun protection coating. With this 2-in-1 solution, theawning front wall offers the best protection in almost any weather. In addition, the wall ensures increased stability of the awning, as it acts as a guy and additionally secures the extended vehicle awning in light winds.
For guying, 4 long and robust nylon guying straps are used, which are plugged into the pre-wall and are infinitely adjustable. 4 V-profile steel tent pegs anchor the wall to the ground. All guying points are reinforced and double-stitched, the zippers are stable, smooth and have an extra drawstring.
The scope of delivery includes the front wall, 4 nylon tension straps, tent pegs and a pannier. The transport bag is large and ensures stress-free repacking of the front wall and accessories.
As a quality feature of our your GEAR tents, we only use selected materials:
The tent material has an above-average water column of 3,000 mm - all seams are sealed with seam tape or covered waterproof. For special material protection, the awning is equipped with a high sun protection factor of UV 50+. This UV coating reduces material fatigue and at the same time protects people and material from excessive UV exposure. An additional, hydrophobic impregnation ensures increased repellency of water and dirt.

 
Sun & Rain Blocker as sun protection
The air-permeable fabric blocks some of the UV radiation and shades around 60%, whereby the view is only marginally impaired.
Sun & Rain Blocker as rain protection
The waterproof rain cover has a 3000mm water column and is equipped with a UV 50+ coating to protect against UV radiation.
3 different piping
• 7.0 mm • 6.2 mm • 4.3 mm
suitable for all common awning manufacturers
Guying straps and tent pegs
The wall is fixed in the ground with 4 sturdy guy straps and tent pegs. Buckles on the straps make it easy to assemble and disassemble.
Material: Mesh fabric
• 100% polyester
• wind and air permeable
• 60% shading
• water and dirt repellent
• quick-drying
Material Cover
• 100% polyester, seam-sealed
• 3000 mm water column
• UV 50+ sun protection
• windproof and waterproof
• quick-drying
 
Sun + Rain Blocker 280
• Width: 280 cm
• Height: 200 cm
• 4 guy straps + 4 V-profile steel pegs
• Transport bag: 55 x 15 x 14 cm
• Total weight: 1.85 kg